Our Products

PNEUMATIC TOOLS

F1B 80-16
Tool for "80" staples with length from 6 to 16 mm

◆ Height : 157
◆ Length : 218
◆ Width : 42
◆ Min/Max Pressure : 4/7
◆ Weight : 0.78
◆ Magazine capacity : 140
◆ Air consumption : 0.37
◆ Actuation Mode : Safety: manual

- Long and narrow nose design: excellent job visibility
- Rubber comfort grip: non-slip handling and reduction of vibrations and fatigue
- One hand latch: fast reloading and reduced downtime
- Reversible bumper: high durabilityRear exhaust with muffler: avoids lubricant from falling onto work surface
- Bottom loading magazine: protects internal parts (reduced maintenance)

F1B 80-16 LN.50
Tool with 50 mm long nose for "80" staples with length from 6 to 16 mm

◆ Height : 205
◆ Length : 218
◆ Width : 42
◆ Min/Max Pressure : 4/7
◆ Weight : 0.84
◆ Magazine capacity : 140
◆ Air consumption : 0.5
◆ Actuation Mode : Safety: manual

- Rubber comfort grip: non-slip handling and reduction of vibrations and fatigue
- One hand latch: fast reloading and reduced downtime Reversible bumper: high durability
- Rear exhaust with muffler: avoids lubricant from falling onto work surface
- Bottom loading magazine: protects internal parts (reduced maintenance)

F45C G-55B W.S.A.
Tool for "G" staples with length from 25 to 55 mm

◆ Height : 316
◆ Length : 365
◆ Width : 90
◆ Min/Max Pressure : 5/8
◆ Weight : 2.4
◆ Magazine capacity : 160
◆ Air consumption : 1.39
◆ Actuation Mode : Single shot/Contact trip

- Adjustable exhaust cover: allows air to be directed away from the operator and the material being fastened
- Rubber comfort grip: non-slip handling and reduction of vibrations and fatigue
- Patented sequential fire / bump fire (CT/SS) device: the safest in the world
- Driver threaded into the piston for a better resistance
- Tool-less jam clearing mechanism provides easy access to nose if staple jams
- Adjustable safety to control countersink consistently

F3C FN-50A
Tool for FN brads, wire 1,35 x 1,60 mm with length from 15 to 50 mm

◆ Height : 245
◆ Length : 290
◆ Width : 70
◆ Min/Max Pressure : 5/7
◆ Weight : 1.7
◆ Magazine capacity : 100
◆ Air consumption : 0.85
◆ Actuation Mode : CONTACT TRIP, SINGLE SEQUENTIAL ACTUATION ON REQUE

- Rubber comfort grip: reduces vibrations and minimizes worker’s fatigue
- No-mar tip: avoids marring of soft wood
- Slim nose: precise nailing
- Peep-hole for viewing brads: reduces the incidence of dry-fire
- Driver threaded into the piston for a better resistance
- Rear safety: better visibility of the work surface
- Tool available also in a plastic case

F21P GN-31A
Light bradder for GN brads, wire 1,00 x 1,27 mm with several lengths from 13 to 31 mm

◆ Height : 187
◆ Length : 257
◆ Width : 49
◆ Min/Max Pressure : 4/7
◆ Weight : 1.15
◆ Magazine capacity : 105
◆ Air consumption : 0.36
◆ Actuation Mode : CONTACT TRIP

- Reversible bumper: high durability
- No-mar tip: avoids marring of soft wood
- Peep-hole for viewing brads: reduces the incidence of dry-fire
- Quick clear device by using comfortable rear latch. No keys needed

F6AC RHN20-100A
Tool for full head 20° plastic strip nails with length from 50 to 100 mm

◆ Height : 380
◆ Length : 545
◆ Width : 105
◆ Min/Max Pressure : 5/8
◆ Weight : 3.93
◆ Magazine capacity : 62
◆ Air consumption : 1.92
◆ Actuation Mode : SINGLE SHOT/CONTACT TRIP

- Rubber comfort grip: reduction of vibrations and fatigue
- Extruded aluminum alloy magazine: holds three strips of nails
- Tool-free depth of drive adjustment to countersink or flush drive nails
- No-mar tip storable in the canister: ensures undamaged wood surfaces
- Two finger trigger for greater firing control
- Body and cap in high strength magnesium alloy: balance and ease of handling
- Patented sequential fire / bump fire (CT/SS) device: the safest in the world
- Toe nailing work contacting element: excellent gripping of wood

F21P GA-18/31A
Tool for "GA" pins with length from 12 to 18 mm

◆ Height : 182
◆ Length : 226
◆ Width : 49
◆ Min/Max Pressure : 4/7
◆ Weight : 1.02
◆ Magazine capacity : 100
◆ Air consumption : 0.36
◆ Actuation Mode : CONTACT TRIP

- Reversible bumper: high durability
- Peep-hole for viewing brads: reduces the incidence of dry-fire
- Steel driver blade: rugged and long lasting
- Quick clear by opening the magazine, no key required
- Steel driver blade: rugged and long lasting

F1B 80-25 PLIER
Bedding plier tool for "80" staples with length from 12 to 25 mm

◆ Height : 327
◆ Length : 380
◆ Width : 75
◆ Min/Max Pressure : 4/7
◆ Weight : 2.22
◆ Magazine capacity : 310
◆ Air consumption : -
◆ Actuation Mode : SAFETY: MANUAL

- Large magazine: it holds 310 staples
- Adjustable jaw opening by simply turning the screw on the top of the tool (from 50 to 70 mm)
- Rubber comfort grip: non-slip handling and reduction of vibrations and fatigue

F3C ATW-38
Tool for "ATW" staples with length from 19 to 38 mm

◆ Height : 231
◆ Length : 343
◆ Width : 0
◆ Min/Max Pressure : 5/7
◆ Weight : 2.2
◆ Magazine capacity : 155
◆ Air consumption : 1.17
◆ Actuation Mode : CONTACT TRIP

- Driver threaded into the piston for a better resistance
- Rubber comfort grip: non-slip handling and reduction of vibrations and fatigue
- Two finger trigger: provides less fatigue and more control

SI-1420

◆ Maximum Torque : 380Nm
◆ Standard impact wrench with 1/2"sq. anvil for general purpose
◆ Simple, robust, single hammer clutch ensures long tool life

SI-1540TSR

◆ Maximum Torque:2,000Nm
◆ Lightweight of 3.4kg and compact size for minimum operator fatigue.
◆ Maximum Torque of 2000Nm over for every heavy bolt applications.
◆ Full Power in reverse helps to unfasten bolts quickly for a quick wheel change.

SI-1546TSR

◆ Maximum Torque:1,900Nm
◆ 6"extended anvil for SI-1540T
◆ Full Power in reverse helps to unfasten bolts quickly for a quick wheel change.

SI-1850B

◆ Maximum Torque:1,600Nm
◆ Straight body impact wrench with 1" sq. anvil and D handle
◆ Original model with a single hammer clutch for reliability
◆ 38mm Capacity

NC-3111

◆ 3/8" Drive air impact wrench.
◆ Air inlet 1/4"

NC-4112

◆ 1/2" Drive air impact wrench.
◆ Air inlet 1/4"

SI-1205B

◆ Maximum Torque:40Nm
◆ Light and small ratchet wrench with 3/8"sq. anvil
◆ This model is the “Mini Ratchet Wrench" standard in the air tools industry

SI-1320A

◆ Maximum Torque:80Nm
◆ Standard ratchet wrench with the front exhaust 3/8"sq. anvil
◆ Reasonable price

SI-1340B

◆ Maximum Torque:110Nm
◆ Premium quality ratchet wrench with a rear exhaust and plastic body cover
◆ Low noise levels and precise planetary gear mechanism assures the highest power transfer, durability and reducing vibration
◆ 360°air inlet swivel directs air away from operator and workplace

NC-211

◆ 1/4" Drive
◆ Mini Air Ratchet Wrench
◆ Air inlet 1/4"

NC-432

◆ 1/2" Drive
◆ Push Air Ratchet Wrench
◆ Air inlet 1/4"

SI-2001S

◆ Small body size die grinder
◆ 1/4" collet

SI-2006S

◆ Small body size, angle head die grinder
◆ 1/4" collet
◆ Compact, lightweight, ergonomic design and feather touch throttle lever for easy operation
◆ Lever throttle with safety lock

SI-2011S

◆ Medium body size die grinder
◆ 1/4" collet
◆ Rear exhaust directs air away from operator and work place
◆ Lever throttle with safety lock
◆Compact, lightweight, ergonomic design and feather touch throttle lever for easy operation

QA-111

◆ 1/2" Drive
◆ 1/4" Air Die Grinder
◆ Air inlet 1/4"

QA-611

◆ 1/4" Drive
◆ 1/4" Amgle Die Grinder
◆ Air inlet 1/4"

QA-221

◆ 1/2" Drive
◆ Heavy Duty Air Die Grinder
◆ Air inlet 1/4"

SI-2501L/2051

◆ Light weight 4" disc grinder with rotary throttle
◆ 40% lighter than SI-2500
◆ Speed governor assures safety operation

SI-2500L/2500

◆ The high quality air motor used ensures the highest power and durability, while reducing vibration
◆ A trouble free tool for industry use

QB-104

◆ 4" Air Die Grinder / Roll Type Throttle
◆ Air inlet 1/4"

QB-105

◆ 4" Air Die Grinder / Roll Type Throttle
◆ Air inlet 1/4"

QB-721

◆ 3" Air Angle Grinder
◆ Air inlet 1/4"

QB-723

◆ 3" Air Die Grinder
◆ Air inlet 1/4"

SI-2351

◆ Angle head sander with 7"disc
◆ Side handle for smooth and stable sanding
◆ Rear exhaust through the handle directs air away from operator and workplace

SI-2400

◆ Vertical grip for stable and easy operation sander with 7" disc.l

QB-46

◆ Air Random Orbital Sander / Non-Vacuum
◆ Air inlet 1/4"

QB-201

◆ Air Finger Sander Orbital Diameter: 3mm
◆ Air inlet 1/4"

QB-312

◆ Air Belt Sander
◆ Air inlet 1/4"

SI-4007B

◆ This air saw is the most popular tool for cutting body panel of motorcars and is one of longest selling models in the automotive repair market
◆ A popular tool at reasonable price

SI-4750

◆ Oscillation cutting tool specially designed to cut body panel of motorcars
◆ Two different cutting blades are supplied with the tool

QG-102

◆ Strait Type Air Shear
◆ Air inlet 1/4"

SI-4007B

◆ Air Shear
◆ Air inlet 1/4"

QG-201

◆ Air Shear
◆ Air inlet 1/4"

QD-221

◆ Air Saw With Hose
◆ Air inlet 1/4"

SI-5200A

◆ 1/2" capacity, geared, pistol grip drill
◆ 500rpm low speed and high torque
◆ Ergonomic, compact, lightweight design with feather touch trigger for easy drill bit centering
◆ Precise planetary gear mechanism with needle roller assures high power, durability and reducing vibration
◆ Side handle for greater hand grip and control for easy operation

SI-5300A

◆ 3/8" capacity geared pistol grip drill
◆ Heavy duty and the best selling model of the drills
◆ Precise planetary gear mechanism with needle roller assures high power, durability and reducing vibration
◆ Ergonomic, compact, lightweight design with feather touch trigger for easy centering

SI-5355